Product info accessories
nidaborder PE
nidaborder PE is an effective, economic and discrete border made from recycled PE. It is ideal for use in gardens and landscaping when creating a border for paths, roads, flower beds and lawns.
Properties:
- creative: specially made to separate two different kinds of surface, available in 2 colours
- economic: prevents the uncontrolled growth and spreading of weeds, so that you save on maintenance costs and weeding
- environmentally friendly: made from 100 % recycled, long-lasting polyethylene and does not pollute the environment
- flexible: supple and strong, therefore easy to adapt to your projects
- practical: fast and easy installation means that this project is extremely economical
- strong: resistant to acids and detergents (road salt, ammonia)
- the borders are fixed in place using black nails made from recycled PE. These nails are available in bags of 600
Technical specifications:
- dimensions: 100 cm x 8 cm x 5 cm (L x W x H)
- colour: green or black
- composition: 100 % recycled polyethylene
- kit: 8 one meter borders + 20 black nails
- resistant to frost and UV light
- natural strength: temperatures from -30 °C to 85 °C
- resistant to acids and detergents (road salt, ammonia)
Installation technique:
Mark off and excavate soil in the required place
Determine the desired height and fix in position with nails
Connecting system
Example of nidaborder PE (wood chips)
up
nidaborder Galva
nidaborder Galva is a galvanised steel edging section and is ideal for creating a border for lawns, playgrounds, paths, access roads, driveways, green areas and numerous other (stone) applications such as terraces and patios, where an aesthetically pleasing appearance is desirable.
Properties:
- creative: specially made to separate two different kinds of surface and ideal when creating your projects, discrete and aesthetic
- safe: smooth, upper edge folded over for optimum safety, including in busy places
- recyclable: contributes to sustainable development
- flexible: both supple and strong, therefore easy to adapt to your projects
- practical: large triangular support hooks provide excellent stability and make it easy to lay at the correct height. Being able to lay this product quickly means you save both time and money.
- strong: raised galvanised steel edge, retain their shape
Each border is supplied with 4 pegs (20 cm).
The pegs are V-shaped (bulldog stakes) and are therefore less likely to bend. They also stay in the ground better.
Technical specifications:
- dimensions: 190 cm x 4 cm x 6 cm (L x W x H)
- composition: alloy steel (iron and carbon) covered, by means of electrolysis or hot setting, with a protective layer of zinc 18 to 20 µm thick
- set: 15 borders (190 cm long) with 60 preformed pegs (20 cm long)
- properties: corrosion resistant in a damp environment and high resistance to mechanical wear
Installation technique:
Mark off and excavate soil in the required place
Lay at the desired height using the support hooks and fix in place using the pegs
Connecting system
Example of keeping gravel together
up
nidaborder Curve
nidaborder CURVE in regenerated PVC provides a border between planted areas and traffic areas of the same or
different types (matting, gravel, asphalt, concrete, aggregate concrete, slabs, paving, stabilised surfaces, etc.). It can
also be used to mark out surrounds for trees or ornamental ponds. nidaborder CURVE is intended for use in both
public and private settings.
Advantages:
- nidaborder CURVE is discrete, almost invisible once laid.
- nidaborder CURVE is quick to lay.
- When executing curves or waves, fitting on the base of the profile is easy – just cut away the spare material at each
end of the border first. Secateurs or cable cutters will do the job.
- No drying time necessary: once nidaborder CURVE has been laid, work can continue on the project immediately.
- nidaborder CURVE is a lightweight product, making it easy to transport and lay.
- Laying nidaborder CURVE does not require any heavy foundation work. Preparation is quick and easy. There is no waiting time for installation.
The profile is laid directly onto the ground or the base of the existing shape. Because of its high load-bearing capacity, no heavy machinery needs to be employed.
- The workload is considerably reduced.
Technical data:
- dimensions: height 40 mm x base width 52 mm x length 2.5 m
- Thickness: 1,2 mm
- coulour: grey (other colours available on demand)
- composition: regenerated PVC
- kit: 20 x 2.50 m pieces (50 rm)
- Resistant to freezing and UV
- Resistant to acids and detergents
- Natural stability: temperatures from -30 to 85°C
Laying technique:
to simplify the creation of
curves, cut the base using
secateurs
level off, then use nails to fix
in place
joint system with U-profile
Example – used to retain
gravel (with nidagravel®)
back to top